Specifications
| Product | Size/mm | Quantity /pcs |
| JGS1 | dia25.4*5 | 4 |
Processing & Coating Requirements
- Surface cut-off reflective film for reflecting laser waveband
1030～1090nm; reflectivity R≥99.8%@45°
1030～1090nm reflectivity R≥99.7%@45土12.5°
Mark 1030, 1040, 1070, 1080, 1090nm reflectivity data; - Coating area does not allow open air bubbles
- Laser power 8000w@40×29 ellipse area;
- Laser power density 2500w/cm2. 5;
- A side marked vibrating lens S / N code;
- B side marked with arrow R1 pointing to R2;
- Unmarked chamfering part, chamfering two-sided angle 0.2 + 0.1, chamfering three-sided angle 0.3 +
0.2, angle greater than 140 ° without chamfering; non-coated area 4 vertical line chamfering C1; - R1 surface chipping requirements, the whole circle (ignoring the C surface) the number of chipping
less than 20 @ vertical edge direction greater than 10um. R2 surface chipping requirements, the whole
circle (ignoring the C surface) the number of chipping less than 50 @ vertical over edge direction greater
than 50um.
Coating Test Curve
