Search
Close this search box.

532nm Laser

532nm Laser Laser Crylink
532nm Laser

532nm all-solid-state green laser is widely used in the fields of laser medicine, lidar, seafloor topography detection, laser dazzling, laser blinding weapons, etc. because of its high photon energy, long distance transmission in water and sensitivity to human eyes. The 1064 nm band spectral lines of Nd:YAG, Nd:YVO4 and other crystals are doubled by frequency doubling crystals KTP, LBO or periodically polarized lithium niobate (PPLN) to achieve continuous green laser output. Combined with Q-switching technology, 532 nm green laser output with high power, high repetition rate or low repetition rate and high single pulse energy is achieved. Compared with Nd:YAG crystals, the pumping bandwidth of Nd:YVO4 crystals at 808 nm is about five times that of Nd:YAG crystals, and the stimulated emission cross section is three times that of Nd:YAG crystals. Moreover, Nd:YVO4 is a biaxial crystal, which can realize the linear polarization laser output without the polarizer. It is advantageous to the polarization matching during frequency transformation. It is more suitable to obtain 1064nm laser output with high efficiency, high power, and high polarization ratio, and can theoretically obtain higher frequency doubling efficiency. There are two main technical routes of green light frequency doubling: end-pumping and side-pumping. End-pumping can obtain higher beam quality.

532nm Microchip Laser System of MA Series

MA series microchip laser is a passively Q-switched solid-state laser based on semiconductor pump. The laser pulse is pure without tail, the single pulse energy is stable, and the beam quality is good. The integrated design of semiconductor pump module and laser crystal makes the compact laser head easy to install and integrate. The system supports internal and external triggering. This series of products include four wavelengths of 1064nm, 532nm, 355nm and 266nm. The full sealing module inside the laser head can be used by customers for secondary development and application.

Model CL532-1kHz-60μJ-MA009CL532-2.5kHz-55μJ-MA010CL532-2.5kHz-90μJ-MA011CL532-5kHz-30μJ-MA012CL532-10kHz-15μJ-MA013CL532-20kHz-10μJ-MA014
Optical parameterWavelength (nm)532532532532532532
Repetition frequency (kHz)12.5*2.5*51020
Average power (mW)60150250150150200
Output energy (μJ)605590301510
Pulse width (ps)150015001500120012001200
Power stability (8h)±3%±3%±3%±3%±3%±3%
Beam modeTEM00TEM00TEM00TEM00TEM00TEM00
Full-angle divergence angle Typ. (Mrad) level @1/e26≤2.5≤2.5666
Vertical @1/e26≤2.5≤2.5666
Polarization characteristics>100:1>100:1>100:1>100:1>100:1>100:1
System parametersSystem power consumption(W)≤35≤25≤25≤35≤35≤35
Power input100-240 VAC,50/60Hz100-240 VAC,50/60Hz100-240 VAC,50/60Hz100-240 VAC,50/60Hz100-240 VAC,50/60Hz100-240 VAC,50/60Hz
Control interfaceRS232, USBRS232, USBRS232, USBRS232, USBRS232, USBRS232, USB
Power supply size (W×H×L, mm)168×88×14090×32.6×12090×32.6×120168×88×140168×88×140168×88×140
Laser head size (W×H×L, mm)45×30×12045×30×12045×30×12045×30×12045×30×12045×30×120
Working temperature (℃)15-3515-3515-3515-3515-3515-35
Storage temperature (℃)0-600-600-600-600-600-60
1.*The light outlet of the laser head is side outlet. See the mechanical dimension drawing for details
2.Customized internal beam expansion function to meet the requirements of small divergence angle (less than 2mrad)
3.MA010, and MA011 are specially designed for miniaturized weather radar applications. They are small in size, low in power consumption, and can be used in high altitudes, large temperature differences, and other subserve environments. This series accepts dual wavelength laser customization, such as 1064nm8532nm, 1064nm&355nm, or others.
  • Pulse width up to 1.5ns
  • Pulse energy up to 200 μJ
  • External pump source fiber pump pulse energy can reach 1.2mJ
  • Repetition frequency up to 20kHz
  • Beam mode is TEM00
  • Fully sealed design, high reliability
  • Lidar                     
  • Optical Parametric Oscillating Pump Source
  • Laser Ranging             
  • Laser induced breakdown spectroscopy
  • Atmospheric monitoring     
  • Laser ultrasonic inspection
  • Optical metrology         
  • Biomedical Science
  • Laser ionization mass spectrometry
  • Laser-induced fluorescence
  • 3D scanning and imaging

532nm Microchip Laser System of MC Series

MC series microchip laser products have very ideal narrow pulse width, but also can achieve high single pulse energy. The product is a passive Q-switched solid-state laser based on semiconductor pump. The laser pulse is pure and tailless, the single pulse energy is stable, and the beam quality is good. The integrated design of semiconductor pump module and laser crystal makes the compact laser head easy to install and integrate. The system supports internal and external triggering. This series of products include four wavelengths of 1064nm, 532nm, 355nm and 266nm. The full sealing module inside the laser head can be used by customers for secondary development and application. The superior product performance index makes its application range very wide, especially in laser measurement, which can meet many different kinds of measurement needs, and also has excellent performance in the application of laser seeds. We can also provide 1064nm and 532nm isolators.

1.*The light outlet of the laser head is side outlet. See the mechanical dimension drawing for details
2.Customized internal beam expansion function to meet the requirements of small divergence angle (less than 2mrad)

Model CL532-1kHz-50μJ-MC008CL532-5kHz-30μJ-MC009CL532-10kHz-15μJ-MC010
Optical parameterWavelength (nm)532532532
Repetition frequency (kHz)1510
Average power (mW)50150150
Output energy (μJ)503015
Pulse width (ps)700700700
Power stability (8h)±3%±3%±3%
Beam modeTEM00TEM00TEM00
Full-angle divergence angle Typ. (Mrad) level @1/e271010
Vertical @1/e271010
Polarization characteristics>100:1 >100:1 >100:1 
System parametersSystem power consumption(W)≤25≤30≤35
Power input100-240 VAC,50/60Hz100-240 VAC,50/60Hz100-240 VAC,50/60Hz
Control interfaceRS232、USBRS232、USBRS232、USB
Power supply size (W×H×L, mm)168×88×140168×88×140168×88×140
Laser head size (W×H×L, mm)45×30×12045×30×12045×30×120
Working temperature (℃)15-3515-3515-35
Storage temperature (℃)0-600-60

0-60

  • Pulse width up to 700ps
  • Pulse energy up to 80 μJ
  • External pump source fiber pump pulse energy can reach 500μJ
  • Repetition frequency up to 10kHz
  • Beam mode is TEM00
  • Fully sealed design, high reliability
  • Seed source
  • Micromachining
  • Laser ionization mass spectrometry
  • Laser ultrasonic inspection
  • Optical Parametric Oscillating Pump Source
  • Biomedical Science
  • Laser-induced fluorescence
  • Laser induced breakdown spectroscopy

532nm Microchip Laser System of MD Series

MD series microchip laser is a passively Q-switched solid-state laser based on semiconductor pump. The laser pulse is pure and tailless, the single pulse energy is stable, and the beam quality is good. The integrated design of semiconductor pump module and laser crystal makes the compact laser head easy to install and integrate. The system supports internal and external triggering. This series of products include four wavelengths of 1064nm, 532nm, 355nm and 266nm. The full sealing module inside the laser head can be used by customers for secondary development and application. This series of lasers have great advantages in seed light, laser micromachining, laser measurement and other applications. We also provide 1064nm and 532nm isolators.

Model CL532-0.1kHz-30μJ-MD003
Optical parameterWavelength (nm)532
Repetition frequency (kHz)0.1
Average power (mW)3
Output energy (μJ)30
Pulse width (ps)300
Power stability (8h)±3%
Beam modeTEM00
Full-angle divergence angle Typ. (Mrad) level @1/e210
Vertical @1/e210
Polarization characteristics>100:1 
System parametersSystem power consumption(W)≤25
Power input100-240 VAC,50/60Hz
Control interfaceRS232、USB
Power supply size (W×H×L, mm)168×88×140
Laser head size (W×H×L, mm)45×30×120
Working temperature (℃)15-35
Storage temperature (℃)0-60
1.*The light outlet of the laser head is side outlet. See the mechanical dimension drawing for details
2.Customized internal beam expansion function to meet the requirements of small divergence angle (less than 2mrad)
  • Pulse width up to 300ps
  • Pulse energy up to 150 μJ
  • External pump source fiber pump pulse energy can reach 360μJ
  • Maximum repetition frequency up to 1kHz
  • Beam mode is TEM00
  • Fully sealed design, high reliability
  • Seed source
  • Laser micromachining
  • Non-linear optical measurement
  • Laser-induced fluorescence
  • Laser ionization mass spectrometry
  • Fluorescence lifetime measurement

532nm Microchip Laser System of MH Series

MH series high repetition rate microchip laser series can achieve a high repetition rate while the pulse width is less than 300ps. The product is a passively Q-switched solid-state laser based on a semiconductor pump, with stable energy, good beam quality, and single longitudinal mode operation. The laser is designed with the full seal, small size, convenient for user installation and integration. The system supports internal and external triggering and can be used for secondary development.

Model CL532-20kHz-1.5μJ-MH001CL532-100kHz-0.5μJ-MH002
Optical parameterWavelength (nm)532532
Repetition frequency (kHz)20100
Average power (mW)3050
Output energy (μJ)1.50.5
Pulse width (ps)300500
Power stability (8h)±3%±3%
Beam modeTEM00TEM00
Full-angle divergence angle Typ. (Mrad) level @1/e21625
Vertical @1/e21625
Polarization characteristics>100:1 >100:1 
System parametersSystem power consumption(W)≤35≤40
Power input100-240 VAC, 50/60Hz100-240 VAC, 50/60Hz
Control interfaceRS232, USBRS232, USB
Power supply size (W×H×L, mm)168×88×140168×88×140
Laser head size (W×H×L, mm)45×33×12045×33×120
Working temperature (℃)15-3515-35
Storage temperature (℃)0-600-60
1. * the light outlet of the laser head is side outlet. Please refer to the mechanical dimension drawing for details.
2. * * high PRF side light output structure, gated trigger, TTL 5V, SMA interface. Other structures are rising edges
  • Pulse width up to 280ps
  • Pulse energy up to 32µJ
  • Maximum repetition frequency up to 20KHz
  • Beam mode is TEM00
  • Laser micromachining
  • Seed source
  • Ultrasound imaging
  • analytical chemistry
  • Time-resolved Raman spectroscopy
  • Biophotonics

532nm Microchip Laser System of MO Series

MO series microchip laser compact structure, plug, and play, can choose space output or fiber coupling two modes.

Model CL532-200Hz-30/25μJ-MO003
Optical parameterWavelength(nm)532
Repetition frequency (Hz)1-200
Maximum output energy of space beam (μJ)30
Fiber Coupling Maximum Output Energy (μJ)25
Pulse width (ns)≤1
Energy Stability(rms)≤3%
Energy Regulation Step Accuracy≤1%
Beam mode (spatial beam output)TEM00
Full-angle divergence angle Typ. (Mrad) level @1/e2≤2
Vertical @1/e2≤2
Polarization characteristics≥100:1
Fiber parameters (fiber coupled output optional)200μm/0.22NA
System parametersPower input24V DC
Modulation inputTTL0-5V,SMB connector
Control interfaceRS232
System Peak Power Consumption (W)<20
System Average Power Consumption (W)<10
Laser size (W × H × L, mm)82×102.8×240(space)/ 82x79x250(optical fiber)
Working temperature (℃)15-35
Storage temperature (℃)0-60
1. The supported operating frequency is 16~200Hz in continuous mode and burst mode.
2. Fiber core diameter: 200μm.
3. The power supply adapter is shipped with matching power supply, which can support 90~260VAC power supply input.
  • Laser engraving
  • Laser luminescence
  • Laser capture micro-cutting
  • Laser mass spectrometry
  • Raman spectroscopy detection
  • Laser film engraving
  • Acoustooptic imaging
  • Laser remote sensing
  • Pulse width < 1ns
  • 1~200Hz frequency adjustable
  • The laser energy can be adjusted on the machine
  • Optical trigger output signal jitter < 100ps
  • Fully sealed design, high reliability
Related Products​

would be happy to meet you and learn all about your requirements & expectations.

celia
Celia Cheng
never
Never Xiong

Contact Us Today, Get Reply Tomorrow

Your information will be kept strictly confidential.

I am Ben Fang, the CEO of laser-crylink.com, me and my team would be happy to meet you and learn all about your business, requirements and expectations.